Miscellaneous Handyman Tips About Bathroom Faucets

When you're in the middle of a bathroom remodel, whether just doing a few tiny things or overhauling the entire room, at some point the issue of replacing or repairing the bathroom faucets is going to come up. This article discusses a few things that any do it yourselfer needs to keep in mind.

Maintenance and Repair Points

Be sure you have the right equipment to work with. This can save you a ton of time and mess, making the project much more efficient. Some tools you may need are a utility knife, wrench, small pipe cutter, pliers, screwdrivers, and handle pullers. Also know which type of faucet you're working with. Single handle faucets function a little differently than double handled ones; you need to be aware of how to deal with each one.

The single handled version doesn't have any washers built in but you can still have problems with drips or leaks. If you're having a problem with the O-rings you can cut them out and replace them with new ones. Do this by rolling it over the stem cartridge to get it snugly into place.

Water Valves

It helps to know the plumbing layout as well. An older home probably doesn't have a water shut off valve directly under the sink unless it had a recently upgrade. So you'll need to shut off the main house water supply before replacing any faucet parts otherwise you'll end up with water spraying all over your bathroom. What if the valve is leaking, too? This can happen if it hasn't been used in a while. You can put on a few drops of oil which will soak in between the nut and the valve stem. Loosen the nut a little before closing the valve.

For more tips, tricks and shopping ideas related to bathroom sink faucets or getting a cheap bathroom faucet visit our website.